7 - 3
DRIV
TROUBLESHOOTING
EBS00157
TROUBLESHOOTING CHART
When basic conditions “(a)” and “(b)” exist, check the following points:
Elevate and spin both wheels. Feel for
wheel bearing damage.
YES Replace the wheel bearing.
(Refer to “STEERING SYSTEM” and “REAR
KNUCKLE AND STABILIZER” in chapter 8.)
NO
Check the wheel nuts and hub nuts for tight-
ness.
NO
Torque to specification.
(Refer to “FRONT AND REAR WHEELS” in
chapter 8.)
YES
Check the front constant velocity joints. Feel
for bearing damage.
NO
Constant velocity joint bearings and differ-
ential gear bearings are probably not dam-
aged. Repeat the test or remove the
individual components.
YES
Check the parking brake adjustment.
NO
Adjust per instructions.
(Refer to “ADJUSTING THE PARKING
BRAKE” in chapter 3.)
YES
Check the rear constant velocity joints. Feel
for bearing damage.
NO
Constant velocity joint bearings and final
drive gear bearings are probably not dam-
aged. Repeat the test or remove the individ-
ual components.
YES
Remove the drive shaft components.
