2 - 43
SPEC
CABLE ROUTING
M
Thermostat outlet hose
N
ISC (idle speed control) unit lead
O
Coolant temperature sensor lead
P
Intake air temperature sensor lead
Q
Ignition coil lead
È
Route the throttle cable through the cable guide.
É
Fasten the starter motor lead, wire harness, and
ground lead with the plastic band, making sure
to align the red tape on the leads and harness
with the band.
Ê
Fasten the throttle body breather hose and wire
harness with the plastic band.
Ë
Fasten the starter motor lead and ground lead
with the holder.
Ì
Fasten the fuel hose with the plastic holder.
Í
Make sure that the plastic band is not fastened
too tightly around the wire harness.
Î
Fasten the wire harness with the plastic band.
Ï
Fasten the spark plug lead and parking brake
cable with the plastic holder.