7 - 39
DRIV
REAR CONSTANT VELOCITY JOINTS, FINAL DRIVE
GEAR AND DRIVE SHAFT
3. Install:
• ring gear fix bolt (M10)
1
(into the drain plug hole)
NOTICE
Finger tighten the bolt until it holds the ring
gear. Otherwise, the ring gear will be dam-
aged.
Ring gear fix bolt (M10)
90890-01527, YM-01527
4. Attach:
• gear lash measurement tool
1
• dial gauge
2
a
Measuring point is 31.1 mm (1.22 in)
Gear lash measurement tool
90890-01467, YM-01467
5. Measure:
• gear lash
Gently rotate the gear coupling from
engagement to engagement
.
TIP:
Measure the gear lash at four positions. Rotate
the shaft 90° each time.
Final gear lash
0.1 ~ 0.3 mm (0.004 ~ 0.012 in)