Yamaha XVS950CU 2014, Service Manual

Page: 183 / 580

PERIODIC MAINTENANCE
3-24
EAS20780
CHANGING THE ENGINE OIL
1. Start the engine, warm it up for several min-
utes, and then turn it off.
2. Place a container under the engine oil drain
bolt.
3. Remove:
• Dipstick “1”
(along with the O-ring)
• Engine oil drain bolt “2”
(along with the gasket)
4. Drain:
• Engine oil
(completely from the crankcase)
5. If the oil filter cartridge is also to be replaced,
perform the following procedure.
▼▼▼ ▼ ▼ ▼▼▼ ▼ ▼ ▼▼▼ ▼ ▼ ▼▼▼ ▼ ▼ ▼▼▼ ▼ ▼ ▼▼▼ ▼ ▼▼▼
a. Remove the oil filter cartridge “1” with an oil
filter wrench “2”.
b. Lubricate the O-ring “3” of the new oil filter
cartridge with a thin coat of engine oil.
NOTICE
ECA13390
Make sure the O-ring “3” is positioned cor-
rectly in the groove of the oil filter cartridge.
c. Tighten the new oil filter cartridge to specifi-
cation with an oil filter wrench.
▲▲▲ ▲ ▲ ▲▲▲ ▲ ▲ ▲▲▲ ▲ ▲ ▲▲▲ ▲ ▲ ▲▲▲ ▲ ▲ ▲▲▲ ▲ ▲▲▲
6. Install:
• Engine oil drain bolt
(along with the gasket )
7. Fill:
• Crankcase
(with the specified amount of the recom-
mended engine oil)
8. Install:
• Dipstick
(along with the O-ring )
9. Check:
• Engine oil level
Refer to “CHECKING THE ENGINE OIL
LEVEL” on page 3-23.
Oil filter wrench
90890-01426
YU-38411
1
2
2
1
T
R
.
.
Oil filter cartridge
17 Nm (1.7 m·kgf, 12 ft·lbf)
T
R
.
.
Engine oil drain bolt
43 Nm (4.3 m·kgf, 31 ft·lbf)
Engine oil quantity
Quantity (disassembled)
4.30 L (4.55 US qt, 3.78 Imp.qt)
Without oil filter cartridge re-
placement
3.70 L (3.91 US qt, 3.26 Imp.qt)
With oil filter cartridge replace-
ment
4.00 L (4.23 US qt, 3.52 Imp.qt)
New
New