Yamaha XVS950CU 2014, Service Manual

Page: 275 / 580

FRONT FORK
4-84
TIP
• Before installing the front fork cap bolt, lubri-
cate its O-ring with grease.
• Temporarily tighten the front fork cap bolt.
• Tighten the front fork cap bolt specified torque,
when installing the front fork with upper brack-
et.
13.Install:
• Protector “1”
TIP
Align the projection “a” on the protector “1” with
the slot “b” in the outer tube.
EAS23050
INSTALLING THE FRONT FORK LEGS
The following procedure applies to both of the
front fork legs.
1. Install:
• Front turn signal light coupler “1”
• Front turn signal light
• Air temperature sensor (left side only)
• Air temperature sensor bracket (left side
only)
TIP
Fit the front turn signal light coupler into the slot
“a” in the front turn signal light.
2. Install:
• Front fork leg “1”
Temporarily tighten the lower bracket pinch
bolts.
TIP
Make sure the inner tube end is flush with the top
of the upper bracket.
3. Tighten:
• Lower bracket pinch bolts
TIP
Tighten the lower bracket pinch bolts to specifi-
cation twice. Tighten the upper and lower bolts
alternately, starting with the upper bolts.
4. Tighten:
• Front turn signal light pinch bolt
• Front fork cap bolt
• Upper bracket pinch bolt
WARNING
EWA13680
Make sure the brake hoses are routed prop-
erly.
T
R
.
.
Air temperature sensor bracket
bolt
16 Nm (1.6 m·kgf, 12 ft·lbf)
1
a
b
1
a
T
R
.
.
Lower bracket pinch bolt
23 Nm (2.3 m·kgf, 17 ft·lbf)
T
R
.
.
Front turn signal light pinch bolt
7 Nm (0.7 m·kgf, 5.1 ft·lbf)
Front fork cap bolt
23 Nm (2.3 m·kgf, 17 ft·lbf)
Upper bracket pinch bolt
20 Nm (2.0 m·kgf, 14 ft·lbf)
1