Yamaha XVS950CU 2014, Service Manual

Page: 93 / 580

CABLE ROUTING (except for ABS models)
2-50
1. Clutch cable
2. Wire harness
3. Crankshaft position sensor lead
4. Oil level switch lead
5. Neutral switch lead
6. Starter motor lead
7. Rear brake hose
8. O
2
sensor
9. Rear brake light switch lead
10. O
2
sensor lead
11. Brake fluid reservoir hose
A. Insert the projection on the wire harness holder
into the hole in the frame.
B. After connecting the crankshaft position sensor
coupler, oil level switch coupler, and neutral switch
coupler, cover the couplers with the coupler cover.
C. To the speed sensor
D. To the starter relay
E. Route the starter motor lead to the front of the
frame cross member.
F. Route the starter motor lead and rear brake light
switch lead under the engine bracket (rear lower
side).
G. Route the rear brake light switch lead under the
mounting position for the starter motor lead on the
engine bracket (rear lower side).
H. Insert the projection on the starter motor lead
holder into the hole in the engine bracket (rear
lower side).
I. After connecting the rear brake light switch coupler
and O
2
sensor coupler, cover the couplers with the
coupler cover.
J. Insert the projection on the wire harness holder
into the hole in the battery box bracket.
K. Point the end of the plastic band downward.