Yamaha XT250X 2008, Service Manual

Page: 89 / 282

FRONT WHEEL
4-5
c. Remove the wheel bearings with a general
bearing puller.
▲▲▲▲▲▲▲▲▲▲▲▲▲▲▲▲▲▲▲▲▲▲▲▲▲▲▲▲▲▲▲▲
EAS21960
ASSEMBLING THE FRONT WHEEL
1. Install:
●
Wheel bearings
●
Oil seals
●
Spacer
▼▼▼▼▼▼▼▼▼▼▼▼▼▼▼▼▼▼▼▼▼▼▼▼▼▼▼▼▼▼▼▼
a. Install the new wheel bearings and oil seals in
the reverse order of disassembly.
CAUTION:
EC3C51001
Do not contact the wheel bearing inner race
“1”or balls “2”. Support with the outer race
“3”.
NOTE:
Use a socket “4” that matches the diameter of
the wheel bearing outer race and oil seal.
▲▲▲▲▲▲▲▲▲▲▲▲▲▲▲▲▲▲▲▲▲▲▲▲▲▲▲▲▲▲▲▲
EAS21970
ADJUSTING THE FRONT WHEEL STATIC
BALANCE
NOTE:
●
After replacing the tire, wheel or both, the front
wheel static balance should be adjusted.
●
Adjust the front wheel static balance with the
brake disc installed.
1. Remove:
●
Balancing weight(s)
2. Find:
●
Front wheel’s heavy spot
NOTE:
Place the front wheel on a suitable balancing
stand.
▼▼▼▼▼▼▼▼▼▼▼▼▼▼▼▼▼▼▼▼▼▼▼▼▼▼▼▼▼▼▼▼
a. Spin the front wheel.
b. When the front wheel stops, put an “X
1
” mark
at the bottom of the wheel.
c. Turn the front wheel 90
°
so that the “X
1
” mark
is positioned as shown.
d. Release the front wheel.
e. When the wheel stops, put an “X
2
” mark at
the bottom of the wheel.
1
2
New
1
2
3
4
All manuals and user guides at all-guides.com