Yamaha WaveRunner VX 700, Service Manual

Page: 101 / 181

5-32
1
2
3
4
5
6
7
8
9
A
Crankcase check
1. Check the mating surfaces. Replace the
crankcase if scratched.
Crankcase installation
1. Apply the Gasket Maker (to the crank-
case mating surfaces).
TIP:
Before applying Gasket Maker, clean the
crankcase mating surfaces.
2. Install the crankshaft.
TIP:
• Install the bearing location pins into the
grooves in the crankcase body.
• Make sure that the crankshaft rotates
smoothly after installing it.
3. Install the crankcase and rubber mount,
and then tighten the bolts to the specified
torque in the order
1 , 2 , and so on.
TIP:
Be sure that the “F” mark
a
is on the fly-
wheel magneto side.
Crankcase bolt:
1st: 15 N·m (1.5 kgf·m, 11.1 ft·lb)
2nd: 27 N·m (2.7 kgf·m, 19.9 ft·lb)
GM
a
Crankcase