32
UW10 Owner’s Manual
English
●
Cannot place the computer in Save Energy (Sleep) mode (or
cancel the mode).
•
Is the computer placed in Sleep mode while the audio application is operating?
•
Some computers do not feature Sleep mode. In this case, disconnect the
USB cable, then connect it again.
●
The recorded level is very low.
•
Is the volume level of the computer low?
→
Set the computer’s “Volume Control” to maximum. (page 23.)
•
To raise the recording level, record the output from the headphone jack of
an AV device that plays the recording source, and raise the output level as
needed. Alternatively, use the Normalize function after recording.
30
