14
UW10 Owner’s Manual
English
●
Music production system using a guitar or microphone via
analog connections
Analog audio signals input from a guitar or microphone are converted to digital
for recording.
Patch the analog input from the guitar or microphone to the UW10’s INPUT jacks via
an effects unit or other equivalent device. In this case, set the UW10’s SOURCE SELECT
switch to “INPUT,” and connect powered speakers or headphones to the UW10.
●
Connecting audio devices
Digital or analog input from an audio device can be converted to wave files on a
computer. You can also edit the wave files on the computer, then record them to
an audio device.
Patch a digital signal from an MD player to the UW10’s DIGITAL IN jack. Patch an
analog signal from a casette tape player or turntable to the UW10’s INPUT jacks.
Set the UW10’s SOURCE SELECT switch to “DIGITAL” or “INPUT” depending on
the jacks you are using. Connect an AV amplifier and mixer as necessary.
If you cannot adjust the output level of the audio device, some high volume sound sources
may distort your recordings, or low volume sound sources may create recordings that are
not inaudible. In this case, adjust the sound source level using the following measures:
•
Connect the PHONE jack of the audio device to the UW10, then adjust the PHONE
level on the audio device.
•
Connect a mixer or other device that enables you to adjust the volume level
between the audio device and the UW10.
If you try to record from a digital audio device (such as an MD or CD player) that has
an optical digital output, use an optional optical digital cable (with square plugs) to
connect the UW10. In this case, you do not have to adjust the level, since the
recording level will be the same as the sound source level.
UW10
USB-AUDIO INTERFACE
SOURCE SELECT
DIGITAL
INPUT
OUTPUT
IN
OUT
L
R
L
R
DIGITAL
INPUT
TRACK DOWN
INPUT
OUTPUT
USB
DIGITAL
OUT
computer
guitar
microphone
Set the SOURCE
SELECT switch
to “INPUT.”
effects unit or
other equivalent device
mixer
MD recorder
powered speakers
NOTE
12
