UW10 Owner’s Manua
l
13
English
Connections
Combining the UW10 with other devices allows for versatile applications as
follows:
●
High-quality music production system using digital connections
Using the UW10 along with a tone generator, such as MOTIF-RACK, enables high-
quality recording.
Connect the UW10, the MOTIF-RACK and a computer using USB cables. Connect
the MOTIF-RACK to the UW10’s DIGITAL IN jack, and set the UW10’s SOURCE
SELECT switch to “DIGITAL.”
Since the signal is sent from the UW10 or MOTIF-RACK to a mixer via an analog
connection, you will be monitoring an analog signal through powered speakers or
headphones. On the other hand, the signal is recorded via a digital connection
from the UW10’s DIGITAL OUT jack to a connected MD recorder. This
configuration enables you to make high-quality digital recordings.
When you are using the connections illustrated above, set the Echo Back setting of
your sequence software to “Off.”
Refer to the Owner’s Manual for the sequence software for detailed information on
setting the Echo Back parameter.
PC + Sequence Software
UW10
DIGITAL
OUT
DIGITAL OUT
INPUT
OUTPUT
OUTPUT
DIGITAL IN
MOTIF-RACK etc.
USB-AUDIO INTERFACE
SOURCE SELECT
DIGITAL
INPUT
OUTPUT
IN
OUT
L
R
L
R
DIGITAL
INPUT
TRACK DOWN
DIGITAL
OUT
Mixer, etc
USB (MIDI data)
Set the SOURCE
SELECT switch
to “DIGITAL.”
USB
(audio data)
MD Recorder,etc
powered speakers
NOTE
11
