Yamaha Tyros5, Reference Manual

Page: 131 / 152

Tyros5 Reference Manual 131
10
Utili
ty
– M
aking Global Settings –
In this display, you can execute one of two reset methods: Factory Reset and Custom Reset. Factory Reset lets you call
up the default initial settings for each item while Custom Reset lets you call up your original settings with a single
touch.
Factory Reset—Restoring the Factory Programmed Settings
This function lets you restore the status of the instrument to the original factory settings.
1
Use the [1

]–[3

] buttons to select the desired item, then press the [4

] but-
tons to enter or remove the checkmark.
When an item is checkmarked, the corresponding parameters will be reset as described below:
2
Press the [D] (FACTORY RESET EXECUTE) button to execute the Factory Reset opera-
tion for all checkmarked items.
SYSTEM RESET
SYSTEM SETUP Resets the System Setup parameters to the original factory settings. Refer to the Data List
(Parameter Chart) for details about which parameters belong to System Setup.
MIDI SETUP Resets the MIDI settings including the MIDI Setups on the USER tab display to the original
factory status.
USER EFFECT Resets the current Effect settings and the following data:
• User Effect Types............................................................................................... page 120
• User Master EQ Types ....................................................................................... page 123
• User Compressor Types .................................................................................... page 123
• User Vocal Harmony Types .............................................................................. page 106
• User Microphone Settings ................................................................................. page 101
MUSIC FINDER Resets the Music Finder data (all Records) to the original factory settings.
FILES & FOLDERS Deletes all files and folders including the Expansion folder stored in the HD1 tab display.
REGIST Turns off all the Registration Memory [1]–[8] lamps, indicating that no Registration Mem-
ory Bank is selected although all the Registration Memory Bank files are maintained. In this
status, you can create Registration Memory setups from the current panel settings.
Custom Reset
(Backup/Restore;
see
page 132 )
Factory Reset
(see below)
The same operation can be done by turning the power on while holding the highest key. In this case, you can create
Registration Memory setups from the default panel settings.
NOTE