38
Tyros5 Reference Manual
3
Replace the Source Pattern of the specific channel with that of another Style.
3-1
Select the desired channel to be replaced via the [A]–[D] and [F]–[I] buttons.
3-2
Press the same button of the selected channel to call up the Style Selection display.
3-3
Select the desired Style, then press the [EXIT] button to return to the original display.
3-4
Select the Section and Channel of the selected Style via the [2
]–[5
] buttons.
3-5
Confirm the sound with the newly assigned Source Pattern via the [6
]–[7
] buttons.
For details, see “Playing the Style During Style Assembly” below.
4
As desired, execute the same operations for another channel.
Playing the Style During Style Assembly
While you are assembling a Style, you can play back the Style and select the method of playback. Use the
[6
]/[7
] (PLAY TYPE) buttons in the Style Assembly display to select the playback method.
•
SOLO:
Plays back the selected channel in the ASSEMBLY Page. Any channels set to REC in the REC
CHANNEL display on the BASIC Page are played back simultaneously.
•
ON:
Plays back the selected channel in the ASSEMBLY Page. Any channels set to other than OFF in the
REC CHANNEL display on the BASIC Page are played back simultaneously.
•
OFF:
Mutes the selected channel in the ASSEMBLY Page.
3-5
3-3
3-1,
3-2
3-4
[A]–[D],
[F]–[I]
buttons
