Yamaha Tyros5, Reference Manual

Page: 18 / 152

18 Tyros5 Reference Manual

VOLUME&ATTACK

Effect/EQ related display
Same parameters as in the VOICE SET “EFFECT/EQ” Page explained on page 15 .
[G]/[H] VIBRATO DEPTH
(Vintage/Home type
only) Sets the Vibrato depth to one of three levels: 1 (low), 2 (mid), or 3 (high).
[D]/[I] FOOTAGES/
VOLUME &
ATTACK / PRESETS Opens the Preset Select display or the relevant setting display (FOOTAGES or VOL-
UME & ATTACK)
[1

] VOL (Volume) Adjusts the overall volume of the Organ Flutes. The longer the graphic bar, the
greater the volume.
[2

] RESP (Response) Affects both the attack and release ( page 14 ) portion of the sound, increasing or
decreasing the response time of the initial swell and release, based on the FOOT-
AGES controls. The higher the value, the slower the swell and release.
[3

] VIBRATO SPEED
(Vibrato Speed)
(Vintage/Home type
only) Determines the speed of the vibrato effect controlled by the Vibrato On/Off ([F] but-
ton) and Vibrato Depth ([G]/[H] buttons).
[4

] MODE The MODE control selects between two modes: FIRST and EACH. In the FIRST
mode, attack (percussive sound) is applied only to the first notes played and held
simultaneously; while the first notes are held, any subsequently played notes have no
attack applied. In the EACH mode, attack is applied equally to all notes.
[5

]–
[7

]
4’, 2 2/3’, 2’ These determine the attack sound volume of the Organ Flutes Voice. The 4’, 2-2/3’
and 2’ controls increase or reduce the volume of attack sound at the corresponding
footages. The longer the graphic bar, the greater the attack sound volume.
[8

] LENG (Length) Affects the attack portion of the sound producing a longer or shorter decay immedi-
ately after the initial attack. The longer the graphic bar, the longer the decay.
Same as the
FOOTAGES display