Tyros5 Reference Manual
15
1
Vo
ices –
Playing the
K
eyboar
d
–
VIBRATO
Vibrato is a quavering, vibrating sound effect that is produced by regu-
larly modulating the pitch of the Voice.
EFFECT / EQ Page
1 REVERB DEPTH / CHORUS DEPTH / DSP DEPTH / PANEL SUSTAIN
2 DSP
3 EQ
Determines the Frequency and Gain of the Low and High EQ bands. For information about EQ, refer to
HARMONY Page
Same as in the [FUNCTION]
[F] HARMONY/ECHO display. See “Using Keyboard Harmony/Echo” on
.
Pitch
DELAY
SPEED
DEPTH
Time
[6
]
DEPTH
Determines the intensity of the Vibrato effect. Higher settings result in a more pro-
nounced Vibrato.
[7
]
SPEED
Determines the speed of the Vibrato effect.
[8
]
DELAY
Determines the amount of time that elapses between the playing of a key and the start
of the Vibrato effect. Higher settings increase the delay of the Vibrato onset.
[1
]/
[2
]
REVERB DEPTH
Adjusts the reverb depth.
[3
]/
[4
]
CHORUS DEPTH
Adjusts the chorus depth.
[5
]
DSP ON/OFF
Determines whether the DSP effect is on or off.
This setting can also be made from the VOICE EFFECT [DSP] button on the panel.
[6
]
DSP DEPTH
Adjusts the DSP depth.
If you want to re-select the DSP type, you can do so in the “2 DSP” menu explained
on
[7
]
PANEL SUSTAIN
Determines the sustain level applied to the edited Voice when the VOICE EFFECT
[SUSTAIN] button on the panel is turned on.
[1
]–
[4
]
DSP TYPE
Selects the DSP effect category and type. Select a type after selecting a category.
[5
]–
[8
]
VARIATION
Two variations are provided for each DSP type. Here, you can edit the VARIATION
on/off status and the variation’s parameter value setting.
[5
]
ON/OFF
Turns the DSP Variation on or off for the selected Voice. This setting can also be made
from the VOICE EFFECT [VARIATION] button on the panel. (This button is effec-
tive only when the [DSP] button is on.)
PARAMETER
Displays the variation parameter. (This differs depending on the effect type and can-
not be changed.)
[6
]–
[8
]
VALUE
Adjusts the value of the DSP variation parameter.
