Tyros5 Reference Manual
123
9
M
ixing Console
– Editi
ng the V
o
lume and
To
nal Balance
–
Editing and Saving Your Original Master EQ Type
1
Press the [F] (EDIT) button in the EQ Page.
The MASTER EQ EDIT display is called up.
2
Use the [B]/[C] buttons to select a preset EQ type.
The set parameters of the selected EQ type are automatically shown at the bottom of the display.
3
Use the [3
]–[7
] buttons to boost or cut each of the five bands.
Use the [8
] buttons to boost or cut all the five bands at the same time.
4
If desired, adjust the Q (bandwidth) and the FREQ (center frequency) of the band
selected in step 3.
To adjust the bandwidth (also called “Shape” or “Q”), use the [1
] buttons. The higher the value of Q, the nar-
rower the band width.
To adjust the FREQ (center frequency), use the [2
] buttons. The available FREQ range is different for each
band.
5
Press the [H] or [I] (STORE 1 or 2) button to execute the Store operation.
In the Naming display called up via this operation, assign the name then press the [8
] (OK) button to store your
settings as a User Master EQ Type, which can be called up via the [B]/[C] buttons.
For details, refer to the Owner’s Manual.
Editing Master Compressor Settings
3
5
2
4
