manualshive.com logo in svg

Yamaha RX10RL, Owner'S Manual

The Yamaha RX10RL Owner's Manual is available for free download from manualshive.com. This comprehensive manual provides users with detailed instructions and information on operating and maintaining their Yamaha RX10RL model. Gain crucial insights and maximize the functionality of your Yamaha RX10RL with this downloadable manual.

Share
Download
background image

8-32

ESU04661 

Adjusting the headlight beams

1. Remove the top cover. (See pages 8-5–8-7 for

removal procedures.) 

2. Use a Phillips screwdriver to turn the headlight beam

adjuster 

1

 and adjust the headlight beams.

Headlight beam movement:

a

Down 

b

Up

3. Install the top cover. 

ESU00355

Battery

This snowmobile is equipped with a sealed-type (MF)
battery, which does not require any maintenance. There
is no need to check the electrolyte or to add distilled
water.

To charge the battery

Have a Yamaha dealer charge the battery as soon as
possible if it seems to have discharged. Keep in mind
that the battery tends to discharge more quickly if the
snowmobile is equipped with electrical accessories.

WARNING

@ 

Battery electrolyte is poisonous and dangerous. It
contains sulfuric acid and can cause severe burns.
Avoid contact with skin, eyes, or clothing. 
ANTIDOTE: 

●

EXTERNAL: Flush with water. 

●

INTERNAL: Drink large quantities of water or
milk. Follow with milk of magnesia, beaten egg,
or vegetable oil. Call physician immediately. 

●

EYES: Flush with water for 15 minutes and get
prompt medical attention. 

Batteries produce explosive gases. Keep sparks,
flame, cigarettes, etc. away. Ventilate when charging
or using in an enclosed space. Always shield your
eyes when working near batteries. 
KEEP OUT OF THE REACH OF CHILDREN. 

@

U8FP10.book  Page 32  Thursday, April 28, 2005  5:11 PM

Summary of Contents for RX10RL




































































































Reviews:

No comments

Related manuals for RX10RL

Polaris 800 XC SP EDGE M-10 Owner'S Manual Supplement preview
800 XC SP EDGE M-10
Brand: Polaris Pages: 1
Lynx RADIEN DEEP SNOW 2022 Series Operator'S Manual preview
RADIEN DEEP SNOW 2022 Series
Brand: Lynx Pages: 284

Brands by name

Popular brands

Load more brands