manualshive.com logo in svg

Yamaha RX10RL, Owner'S Manual

The Yamaha RX10RL Owner's Manual is available for free download from manualshive.com. This comprehensive manual provides users with detailed instructions and information on operating and maintaining their Yamaha RX10RL model. Gain crucial insights and maximize the functionality of your Yamaha RX10RL with this downloadable manual.

Share
Download
background image

8-9

ESU04830 

Adjusting the engine idling speed

CAUTION:

@ 

●

Be sure to have a Yamaha dealer make this
adjustment. 

●

Make sure that the throttle lever moves smoothly. 

@

1. Remove the shroud, the left and right side covers,

and the top cover. (See pages 8-5–8-7 for removal
procedures.) 

2. Start the engine and warm it up. 
3. Remove the headlight unit bolts 

1

, and then lift up

the headlight unit. 

4. Turn the idle adjusting screw 

2

 in or out to adjust the

engine idling speed.

5. Install the headlight unit, making sure to insert the

tabs on the headlight unit stay into the slots on the
bottom of the headlight unit. 

6. Install the headlight unit bolts, and then tighten them

to the specified torque.

7. Install the top cover, the left and right side covers,

and the shroud. 

Standard engine idling speed: 1,500 

±

 100 r/min

Headlight unit bolt tightening torque: 

3 Nm (0.3 m·kgf, 2.2 ft·lb)

U8FP10.book  Page 9  Thursday, April 28, 2005  5:11 PM

Summary of Contents for RX10RL




































































































Reviews:

No comments

Related manuals for RX10RL

Brands by name

Popular brands

Load more brands