Yamaha RX-V379 Owner'S Manual Download Page 18

Page: 18 / 78

Connect a TV to the unit so that video input to the unit can be output to the TV. You can
also enjoy playback of TV audio on the unit.

To maximize the performance of the unit, we recommend connecting a TV with an HDMI
cable.

■

HDMI connection

Connect the TV to the unit with an HDMI cable and a digital optical cable.

• You do not make a digital optical cable connection between the TV and the unit in the following cases:

– If your TV supports Audio Return Channel (ARC)

– If you will receive TV broadcasts only from the set-top box

• If you connect a TV that supports HDMI Control to the unit with an HDMI cable, you can control the unit’s

power and volume with the TV’s remote control.

To use HDMI Control and ARC, you need to configure the HDMI settings on the unit. For
details on the settings, see “Information on HDMI” (p.70).

■

Composite video connection

When connecting any video device with a video pin cable, connect the TV to the
MONITOR OUT (VIDEO) jack.

• If you connect your TV to the unit with a cable other than HDMI, video input to the unit via HDMI cannot be

output to the TV.

• Operations with TV screen are available only when your TV is connected to the unit via HDMI.

• If you will receive TV broadcasts only from the set-top box, you do not need to make an audio cable

connection between the TV and the unit.

❑

VIDEO (composite video) connection (with a video pin cable)

Connecting a TV

About Audio Return Channel (ARC)

• ARC allows audio signals to travel both ways. If you connect a TV that supports ARC to the unit with a

single HDMI cable, you can output video/audio to the TV or input TV audio to the unit.

• When using ARC, connect a TV with an HDMI cable that supports ARC.

HDMI

HDMI

AUDIO 1

(TV)

OPTICAL

HDMI OUT jack

HDMI input

The unit (rear)

AUDIO 1 (OPTICAL) jack

Audio output

(digital optical)

VIDEO

AUDIO 1

(TV)

OPTICAL

MONITOR

OUT

Video input

(composite video)

The unit (rear)

MONITOR OUT (VIDEO) jack

Audio output

(digital optical)

AUDIO 1 (OPTICAL) jack

1 2 3 4 5 6 7 8

00_RX-V379_om_U.book Page 18 Tuesday, January 13, 2015 4:50 PM

Summary of Contents for RX-V379















































































Search results

Summary of Contents for RX-V379

Reviews:

Related manuals for RX-V379

Brands by name

Popular brands

Yamaha RX-V379, Owner'S Manual

Search results

Summary of Contents for RX-V379

Reviews:

Related manuals for RX-V379

Brands by name

Popular brands