Yamaha RX-V379 Owner'S Manual Download Page 51

Page: 51 / 78

Enables/disable SCENE link playback when “HDMI Control” is set to “On”.

When SCENE link playback is enabled, HDMI Control-compatible devices
connected to the unit via HDMI automatically works as follows, with a scene
selection.

• TV: turning on and displaying video from the playback device

• Playback device: starting playback

Choices (SCENE keys)

BD/DVD, TV, CD, RADIO

Settings

Default

BD/DVD, TV: On

CD, RADIO: Off

• SCENE link playback may not work properly due to the compatibility between devices. We

recommend using TV and playback devices from the same manufacturer so that HDMI Control works
more effectively.

SCENE

Off

Disables SCENE link playback for the selected SCENE key.

Enables SCENE link playback for the selected SCENE key.

00_RX-V379_om_U.book Page 51 Tuesday, January 13, 2015 4:50 PM

Summary of Contents for RX-V379















































































Search results

Summary of Contents for RX-V379

Reviews:

Related manuals for RX-V379

Brands by name

Popular brands

Yamaha RX-V379, Owner'S Manual

Search results

Summary of Contents for RX-V379

Reviews:

Related manuals for RX-V379

Brands by name

Popular brands