Yamaha RX-V379 Owner'S Manual Download Page 17

Page: 17 / 78

■

Video/audio jacks

❑

HDMI jacks

Transmit digital video and digital sound through a single
jack. Use an HDMI cable.

• Use a 19-pin HDMI cable with the HDMI logo. We recommend using

a cable less than 5.0 m (16.4 ft) long to prevent signal quality
degradation.

• The unit’s HDMI jacks support the HDMI Control, Audio Return

Channel (ARC), and 3D and 4K Ultra HD video transmission
(through output) features.

• Use high speed HDMI cables to enjoy 3D or 4K Ultra HD videos.

■

Video jacks

❑

VIDEO jacks

Transmit analog video signals. Use a video pin cable.

■

Audio jacks

❑

OPTICAL jacks

Transmit digital audio signals. Use a digital optical
cable. Remove the tip protector (if available) before
using the cable.

❑

COAXIAL jacks

Transmit digital audio signals. Use a digital coaxial
cable.

❑

AUDIO jacks

(Stereo L/R jacks)

Transmit analog stereo audio signals. Use a stereo pin
cable (RCA cable).

(Stereo mini jack)

Transmits analog stereo audio signals. Use a stereo
mini-plug cable.

Input/output jacks and cables

HDMI cable

Video pin cable

OPTICAL

Digital optical cable

Digital coaxial cable

Stereo pin cable

Stereo mini-plug cable

00_RX-V379_om_U.book Page 17 Tuesday, January 13, 2015 4:50 PM

Summary of Contents for RX-V379















































































Search results

Summary of Contents for RX-V379

Reviews:

Related manuals for RX-V379

Brands by name

Popular brands

Yamaha RX-V379, Owner'S Manual

Search results

Summary of Contents for RX-V379

Reviews:

Related manuals for RX-V379

Brands by name

Popular brands