Yamaha RX-V379 Owner'S Manual Download Page 43

Page: 43 / 78

■

Lipsync (Lipsync)

Enables/disables the adjustment configured in “Lipsync” (p.52) in the “Setup” menu.

• This setting is applied separately to each input source.

Settings

■

Signal Info (Signal Info)

Displays information about the video/audio signal.

Choices

• To switch the information on the front display, press the cursor keys (

) repeatedly.

■

Audio In (Audio)

Combines the video jack of the selected input source (HDMI 1–4 or AV 1–3) with an
audio jack of others. For example, use this function in the following cases.

• Connecting a playback device that supports HDMI video output, but not HDMI audio

output

Input sources

HDMI 1–4, AV 1–3

■

Setup procedure

(To input audio through a digital optical jack)

Select “AUDIO 1” and connect the device to the unit’s corresponding audio jacks with a
digital optical cable.

(To input audio through a digital coaxial jack)

Select “AUDIO 2” or “AV 1” and connect the device to the unit’s corresponding audio
jacks with a digital coaxial cable.

(To input audio through analog audio jacks)

Select “AV 2” or “AV 3”, and connect the device to the unit’s corresponding audio jacks
with a stereo pin cable.

■

Video Out (Video)

Selects a video to be output with the selected audio source. For example, you can
watch the video while listening to the radio.

Input sources

AUDIO, TUNER, Bluetooth, AUX

Settings

Off (Off)

Disables the “Lipsync” adjustment.

On (On)

Enables the “Lipsync” adjustment.

Format (FORMAT)

Audio format of the input signal

Channel (CHANNEL)

The number of source channels in the input signal (front/surround/
LFE)
For example, “3/2/0.1” means 3 front channels, 2 surround channels,
and LFE.

Sampling
(SAMPLING)

The number of samples per second of the input digital signal

Bitrate (BITRATE)

The amount of data per second of the input bitstream signal

Video In (VIDEO IN)

Type and resolution of the input digital signal

Video Out
(VIDEO OUT)

Type and resolution of the output digital signal

Off (Off)

Does not output video.

HDMI 1–4, AV 1–3

Outputs video input through the corresponding video input jacks.

00_RX-V379_om_U.book Page 43 Tuesday, January 13, 2015 4:50 PM

Summary of Contents for RX-V379















































































Search results

Summary of Contents for RX-V379

Reviews:

Related manuals for RX-V379

Brands by name

Popular brands

Yamaha RX-V379, Owner'S Manual

Search results

Summary of Contents for RX-V379

Reviews:

Related manuals for RX-V379

Brands by name

Popular brands