Yamaha RX-V379 Owner'S Manual Download Page 28

Page: 28 / 78

TUNING

PRESET

MUTE

TUNING

MEMORY

TOP MENU

HOME

POP-UP/MENU

DISPLAY

RETURN

SETUP

OPTION

VOLUME

PROGRAM

STRAIGHT

ENHANCER

BASS

BLUETOOTH

INPUT

DVD

SCENE

RADIO

SLEEP

ENTER

BLUE

YELLOW

GREEN

RED

TUNING

PRESET

TUNING

MEMORY

TOP MENU

HOME

POP-UP/MENU

DISPLAY

RETURN

SETUPP

OOPTION

PROGRAM

STRAIGHT

ENHANCER

BASS

DVD

SCENE

RADIO

SLEEP

ENTER

BLUE

YELLOW

GREEN

RED

Input selection

Input selection
keys

keys

VOLUME

MUTE

PLAYBACK

Turn on the external devices (such as a TV or BD/
DVD player) connected to the unit.

Use the input selection keys to select an input
source.

Start playback on the external device or select a
radio station.

Refer to the instruction manual for the external device.

For details on the following operations, see the
corresponding pages.

• Listening to FM/AM radio (p.35)

• Playing back music stored on a BLUETOOTH device

(p.39)

Press VOLUME to adjust the volume.

• To mute the audio output, press MUTE. Press MUTE again to unmute.

• To adjust the treble/bass settings, use the “Option” menu or TONE

CONTROL on the front panel (p.42).

Switching information on the front display

Press INFO.

Each time you press the key, the displayed item changes.

About 3 seconds later, the corresponding information for
the displayed item appears.

• Available items vary depending on the selected input source. The displayed

item can also be applied separately to each input source group.

* The name of the audio decoder currently activated is displayed. If no audio

decoder is activated, “Decoder Off” appears.

Basic playback procedure

Input source group

Item

HDMI
AV
AUDIO
AUX
Bluetooth

Input (input source name), DSP Program (sound
mode name), Audio Decoder (decoder name*)

TUNER

Frequency (frequency), DSP Program (sound mode
name), Audio Decoder (decoder name*)

* (U.K. and Europe models only)

Radio Data System data is also available when the unit
is tuned into a Radio Data System broadcasting station
(p.38).

MUTE

ENHANCER STEREO TUNED

SLEEP

OUT

ECO

CHARGE

ADAPTIVE DRC

VIRTUAL

Audio Decoder

VOL.

Item name

MUTE

ENHANCER STEREO TUNED

SLEEP

OUT

ECO

CHARGE

ADAPTIVE DRC

VIRTUAL

†‡Pro Logic

VOL.

Information

Input selection

keys

00_RX-V379_om_U.book Page 28 Tuesday, January 13, 2015 4:50 PM

Summary of Contents for RX-V379















































































Search results

Summary of Contents for RX-V379

Reviews:

Related manuals for RX-V379

Brands by name

Popular brands

Yamaha RX-V379, Owner'S Manual

Search results

Summary of Contents for RX-V379

Reviews:

Related manuals for RX-V379

Brands by name

Popular brands