En
12
Select the speaker layout for the number of speakers that you are using and place the speakers and subwoofer in your room. This section describes the representative speaker layout
examples.
* Place the surround speakers in front and set "Virtual CINEMA FRONT" (p.48) in the "Setup" menu to "On".
1
Placing speakers
Caution
• (U.S.A. and Canada models only)
Under its default settings, the unit is configured for 8-ohm speakers. When connecting 6-ohm speakers, set the unit’s speaker impedance to “6
Ω
MIN”. For details, see “Setting the speaker impedance” (p.14).
• (Except for U.S.A. and Canada models)
Use speakers with an impedance of at least 6
Ω
.
• Use a subwoofer with built-in amplifier.
• Be sure to connect the front left and right speakers.
Speaker type
Abbr.
Function
Speaker system (the number of channels)
5.1
5.1
(Virtual
CINEMA
FRONT)
4.1
3.1
2.1
Front (L)
1
Produce front right/left channel sounds (stereo sounds).
●
●
●
●
●
Front (R)
2
●
●
●
●
●
Center
3
Produces center channel sounds (such as movie dialogue and vocals).
●
●
●
Surround (L)
4
Produce surround right/left channel sounds.
●
●
*
●
Surround (R)
5
●
●
*
●
Subwoofer
9
Produces LFE (low-frequency effect) channel sounds and reinforces the bass parts of other channels.
This channel is counted as “0.1”.
●
●
●
●
●
1 2 3 4 5 6 7 8
00_RX-V379_om_U.book Page 12 Tuesday, January 13, 2015 4:50 PM
