Yamaha RX-V379 Owner'S Manual Download Page 45

Page: 45 / 78

Setup menu items

Menu

Item

Function

Page

Speaker

Configuration

Subwoofer

Selects whether or not a subwoofer is connected.

Front

Selects the size of the front speakers.

Center

Selects whether or not a center speaker is connected and its size.

Surround

Selects whether or not surround speakers are connected and their size.

Crossover

Sets the lower limit of the low-frequency component that can be output from speakers whose size is set to “Small”.

Subwoofer Phase

Sets the phase of the subwoofer.

Extra Bass

Enables/disables Extra Bass.

Virtual CINEMA FRONT

Selects whether to use the front 5-channel speaker (Virtual CINEMA FRONT) configuration.

Distance

Sets the distance between each speaker and listening position.

Level

Adjusts the volume of each speaker.

Equalizer

Adjusts the tone with an equalizer.

Test Tone

Enables/disables the test tone output.

HDMI

Configuration

HDMI Control

Enables/disables HDMI Control.

Audio Output

Selects a device to output audio.

TV Audio Input

Selects an audio input jack of the unit to be used for TV audio input.

Standby Sync

Selects whether to use HDMI control to link the standby behavior of the TV and the unit.

ARC

Enables/disables ARC.

SCENE

Enables/disables SCENE link playback.

Sound

DSP Parameter

Panorama

Enables/disables the broadening effect of the front sound field.

Center Width

Adjusts the broadening effect of the center sound field.

Dimension

Adjusts the difference in level between the front and surround sound fields.

Center Image

Adjusts the center orientation level (broadening effect) of the front sound field.

Lipsync

Select

Selects the method to adjust the delay between video and audio output.

Adjustment

Adjusts the delay between video and audio output manually.

Volume

Scale

Switches the scale of the volume display.

Dynamic Range

Selects the dynamic range adjustment method for bitstream audio (Dolby Digital and DTS signals) playback.

Max Volume

Sets the maximum volume to prevent excessive loudness.

Initial Volume

Sets the initial volume for when this receiver is turned on.

00_RX-V379_om_U.book Page 45 Tuesday, January 13, 2015 4:50 PM

Summary of Contents for RX-V379















































































Search results

Summary of Contents for RX-V379

Reviews:

Related manuals for RX-V379

Brands by name

Popular brands

Yamaha RX-V379, Owner'S Manual

Search results

Summary of Contents for RX-V379

Reviews:

Related manuals for RX-V379

Brands by name

Popular brands