Yamaha RX-V379 Owner'S Manual Download Page 11

Page: 11 / 78

PREPARATIONS

This completes all the preparations. Enjoy playing movies, music, radio and other content with the unit!

General setup procedure

Placing speakers (p.12)

Select the speaker layout for the number of speakers that you are using and place them in your room.

Connecting speakers (p.15)

Connect the speakers to the unit.

Connecting a TV (p.18)

Connect a TV to the unit.

Connecting playback devices (p.19)

Connect video devices (such as BD/DVD players) and audio devices (such as CD players) to the unit.

Connecting the FM/AM antennas (p.22)

Connect the supplied FM/AM antennas to the unit.

Connecting the power cable (p.22)

After all the connections are complete, plug in the power cable.

Selecting an on-screen menu language
(p.23)

Select the desired on-screen menu language.

Optimizing the speaker settings
automatically (YPAO) (p.24)

Optimize the speaker settings, such as volume balance and acoustic parameters, to suit your room
(YPAO).

00_RX-V379_om_U.book Page 11 Tuesday, January 13, 2015 4:50 PM

Summary of Contents for RX-V379















































































Search results

Summary of Contents for RX-V379

Reviews:

Related manuals for RX-V379

Brands by name

Popular brands

Yamaha RX-V379, Owner'S Manual

Search results

Summary of Contents for RX-V379

Reviews:

Related manuals for RX-V379

Brands by name

Popular brands