background image

En

42

Input Select (Input)

Switches the input source. Press ENTER to switch to the selected input source.

Choices

HDMI 1-4, AUDIO 1-2, AV 1-3, TUNER, Bluetooth, AUX

Tone Control (Tone Control)

Adjusts the high-frequency range (Treble) and low-frequency range (Bass) of sounds.

Choices

Treble (Treble), Bass (Bass)

Setting range

-6.0 dB to Bypass (Bypass) to +6.0 dB (0.5 dB increments)

• You can also adjust the tone with the front panel controls. Press TONE CONTROL to select "Treble" or 

"Bass", then press PROGRAM to make an adjustment.

• If you set an extreme value, sounds may not match those from other channels.

DSP/Surround (DSP/Surround)

Configures the sound field program and surround settings.

DSP Level (DSP Level)

Adjusts the sound field effect level.

Setting range

-6 dB to 0 dB to +3 dB (1 dB increments)

Adaptive DRC (A.DRC)

Sets whether the dynamic range (from maximum to minimum) is automatically adjusted 
when the volume level is adjusted. When it is set to “On”, it is useful for listening to 
playback at a low volume at night.

Settings

If “On” is selected, the dynamic range becomes narrow at a low volume and wide at a 
high volume.

Enhancer (Enhancer)

Enables/disables Compressed Music Enhancer (p.34).

• This setting is applied separately to each input source.

• You can also use ENHANCER on the remote control to enable/disable Compressed Music Enhancer 

(p.34).

Settings

Default

Bluetooth, TUNER: On (On)

Others: Off (Off)

Volume Trim (Volume Trim)

Fine-adjusts volume difference between input sources or subwoofer volume.

Input Trim (In.Trim)

Corrects volume differences between input sources. If you are bothered by volume 
differences when switching between input sources, use this function to correct it.

• This setting is applied separately to each input source.

Setting range

-6.0 dB to 0.0 dB to +6.0 dB (0.5 dB increments)

Subwoofer Trim (SW.Trim)

Fine-adjusts the subwoofer volume during playback.

Setting range

-6.0 dB to 0.0 dB to +6.0 dB (0.5 dB increments)

On (On)

Automatically adjusts the dynamic range.

Off (Off)

The dynamic range is not automatically adjusted. 

Off (Off)

Disables Compressed Music Enhancer.

On (On)

Enables Compressed Music Enhancer.

00_RX-V379_om_U.book  Page 42  Tuesday, January 13, 2015  4:50 PM

Summary of Contents for RX-V379















































































Reviews: