Yamaha RAPTOR 700, Owner'S Manual

Page: 280 / 424

8-31
7. Check the O-rings for damage, and
replace them if necessary.
8. Install a new oil filter element and the O-
rings.
NOTE:
Make sure that the O-rings are properly seated.
9. Install the oil filter element cover by
installing the bolts, and then tighten them
to the specified torque.
10. Install the crankcase engine oil drain bolt
and the engine oil tank drain bolt, and then
tighten them to the specified torques.
1
2
2
1. Oil filter element cover 2. O-ring (
×
2)
1. Couvercle de l’élément 2. Joint torique (
×
2)
du filtre à huile
1. Cubierta del filtro de aceite 2. Junta torica (
×
2)
Tightening torque:
Oil filter element cover bolt:
10 Nm (1.0 m
0
kgf)
Tightening torques:
Crankcase engine oil drain bolt:
23 Nm (2.3 m
0
kgf)
Engine oil tank drain bolt:
19 Nm (1.9 m
0
kgf)
1S3-9-60 8 6/7/05 10:25 AM Page 8-31