Yamaha QS300 Owner'S Manual Download Page 33

Page: 33 / 217

◆

Then, press

(Amp).

The following display appears:

From the above page (Element Amp), select the first Rate dial for Ele-
ment 1 (EG Attack Rate), and change the value to around 15.

Amplitude (level) EG Attack Rate
parameter/value.

Element 1, Rate dial 1 (EG Attack Rate).

Use the cursor buttons to select the fourth Rate dial of Element 1 (EG
Release Rate), and also change this value to around 15.

Amplitude (level) EG Release Rate
parameter/value.

Now, play the Voice again. Use the

button to turn the Compare

function on and off, and listen to how much the sound has changed from the
original Voice.

Editing a Voice

GUIDED TOUR

Element 1, Rate dial 4 (EG Release Rate).

Summary of Contents for QS300


























































































































































































































Search results

Summary of Contents for QS300

Reviews:

Related manuals for QS300

Brands by name

Popular brands

Yamaha QS300, Owner'S Manual

Search results

Summary of Contents for QS300

Reviews:

Related manuals for QS300

Brands by name

Popular brands