Yamaha QS300, Owner'S Manual

Page: 104 / 217

100
◆ ◆ ◆ ◆ ◆ ◆ ◆ ◆ ◆ ◆ ◆ ◆ ◆ ◆ ◆ ◆ ◆ ◆ ◆ ◆ ◆ ◆ ◆ ◆ ◆ ◆ ◆ ◆ ◆ ◆ ◆ ◆ ◆ ◆ ◆ ◆ ◆ ◆ ◆ ◆ ◆
All-track Recording (Realtime and Punch-in)
The All-track Recording mode allows simultaneous realtime
(or punch-in) recording of all 16 sequencer tracks. This can
be useful when you want to record complete sequences
from another sequencer or music computer which is not
data-compatible with the QS300.
To use All-track Recording: .................................................
1.
Select a Song for recording.
2. Press RECORD to set record to standby and select
Realtime Recording (
^
) or Punch-in Recording
(
&
).
3.
Press
!
(AllTr) to enable All-track Recording.
F1 F2 F3 F4 F5 F6 F7 F8
Press
!
to enable All-track
Recording.
Channel/Track bar appears in reverse
display, indicating All-track Recording
is active.
4. To record, follow the steps described in Realtime
Recording (steps
4
and
7
-
9
) or Punch-in Recording
(steps
4
-
7
) above.
The record procedure is exactly the same as that described
for realtime or punch-in recording, except that all 16
sequencer tracks are recorded simultaneously (assuming, of
course, that appropriate MIDI data is received on the
corresponding MIDI channels — see the MIDI Channel
parameter, page 94).