Yamaha QS300, Owner'S Manual

Page: 114 / 217

110
◆ ◆ ◆ ◆ ◆ ◆ ◆ ◆ ◆ ◆ ◆ ◆ ◆ ◆ ◆ ◆ ◆ ◆ ◆ ◆ ◆ ◆ ◆ ◆ ◆ ◆ ◆ ◆ ◆ ◆ ◆ ◆ ◆ ◆ ◆ ◆ ◆ ◆ ◆ ◆ ◆
○ ○ ○ ○ ○ ○ ○ ○ ○ ○ ○ ○ ○ ○ ○ ○ ○ ○ ○ ○ ○ ○ ○ ○ ○ ○ ○ ○ ○ ○ ○ ○ ○ ○ ○ ○ ○ ○ ○ ○ ○ ○ ○ ○ ○ ○ ○ ○
Multi Controls
As with the Multi controls of the Song mode, the Multi
controls in the Pattern mode give you extensive and easy-
to-use control over a wide variety of parameters for the
Voices of all Pattern tracks. These parameters include
Voice Bank and Voice, volume, panning, and effect sends.
To call up the Multi controls: ..............................................
Press
p
to enter the Pattern mode. Then, from the
main Pattern Play display (shown below), press
$
(Multi).
F1 F2 F3 F4 F5 F6 F7 F8
The tree chart below shows all parameter pages for the
Multi controls. The main paths are the Mixer pages (which
include Voice and volume settings), and the Effect pages.
●
Voice Mode
Settings: Phrase (Phr), Pattern (Pat)
This allows you to switch between the Pattern and Phrase
Voice assignments.
●
Voice
Range: 1 — 128, D1 — D12 (129 — 140)*, off (141)
* Values in parentheses can be entered from the numeric keypad.
Same as the corresponding parameter in the Song mode.
(See page 73.)
Pattern Multi
Volume
Path:
p
➞
$
(Multi)
➞
*
!
(Mixer)
➞
*
^
(Volume)
* Pressing this may not be necessary if the appropriate page has already been called up.
Voice category (Voice number and name
appear at top right when this is highlighted).
Channel/Track numbers.
Pan (for each
channel).
Volume (for each
channel).
Voice Mode
●
Pan
Range: random (-64)*, left 63 (-63) — center (0) — right
63 (+63)
* Values in parentheses can be entered from the numeric keypad.
Same as the corresponding parameter in the Song mode.
(See page 73.)
●
Volume (Vol)
Range: 0 — 127
Same as the corresponding parameter in the Song mode.
(See page 73.)