Yamaha F150B, Service Manual

Page: 409 / 458

9-44
PTT motor
0
1
2
3
4
5
6
7
8
9
10
A
Installing the reservoir
1. Install a new O-ring
a
and the reservoir
b
, and then tighten the reservoir mount-
ing bolts
c
to the specified torque.
2. Install a new O-ring
d
and the reservoir
cap
e
, and then tighten the reservoir cap
e
to the specified torque.
Installing the PTT motor
Do not use a rag when assembling the
PTT unit because dust and particles on
the PTT unit components can lead to poor
performance.
1. Install the joint
a
and gear pump filter
b
.
2. Fill the gear pump housing with the
recommended fluid to the correct level
a
.
3. Turn the joint
a
with a screwdriver, and
then remove any air between the pump
gear teeth.
4. Remove all of the air bubbles with a
syringe or suitable tool.
5. Install a new O-ring
c
and the PTT
motor assembly
d
, and then tighten the
PTT motor mounting bolts
e
to the
specified torque.
TIP:
Align the projection
b
on the armature shaft
with the slot
c
in the joint.
Reservoir mounting bolt
c
:
5 N·m (0.5 kgf·m, 3.7 ft·lb)
Reservoir cap
e
:
0.7 N·m (0.07 kgf·m, 0.5 ft·lb)
a
b
d
e
c
c
a
b
Recommended PTT fluid: ATF Dexron
ΙΙ
PTT motor mounting bolt
e
:
5 N·m (0.5 kgf·m, 3.7 ft·lb)
a
c
d
e
e
e
e
b
c