Rhythm Pattern Program
ELC-02/ELCU-M02 Owner’s Manual
149
10
Rh
ythm Program
2
NOTE [
L
] [
R
] controls
Selects the previous/next position’s note of the currently
selected instrument. In the notes below for example, you
can select notes
1
,
3
and
4
one by one. Rests (
2
and
5
) are ignored.
3
QUANTIZE [
L
] [
R
] controls
Advances or reverses the rhythm clock by one step. The
size of a single step is determined by the Quantize value.
2
Change the accent level by using the
ACCENT buttons or Accent field.
The Accent field allows for finer changes.
1
Accent field
Touch on the box to enable the Accent field.
Turning the Data Control dial changes the accent level
over a range of 0 – 127.
The minimum setting results in no sound.
2
ACCENT buttons
Determines the coarse accent level. Eight accent levels
(from “
” to “
”) are available.
Press the desired Accent button to change the currently
selected note to the selected level.
To move an entered note:
1
Select the note you want to move (as in
step 1 on page 148).
2
Press the Rhythm Clock box to enable
the box.
3
Turn the Data Control dial to change the
position by one clock.
To change the length of an entered note:
The length of sustaining sounds such as Snare Roll and
Whistle can be changed by adjusting the Gate Time. See
page 154 for more information.
To erase an entered note:
1
Select the note you want to erase (as in
step 1 on page 148).
2
Press the [REST] button in the ACCENT
section of the display.
The selected note is deleted and replaced with a rest.
1
2 3
4
5
1
2
