manualshive.com logo in svg

Yamaha CX-A5100, Owner'S Manual

The Yamaha CX-A5100 is a cutting-edge AV preamplifier that delivers an unparalleled audio and video experience. To get the most out of this advanced device, make sure to download the comprehensive Owner's Manual for free from our website, manualshive.com. This manual provides detailed instructions on setup, features, and troubleshooting.

Share
Download
background image

En

55

Error messages

If any error message is displayed during the measurement, resolve the problem and perform YPAO again.

Error message

Cause

Remedy

E-1: No Front SP

Front speakers are not detected.

Follow the on-screen instructions to exit YPAO, turn off the unit and power amplifier, and then check the 
power amplifier connections (to the unit or to the corresponding speakers).
(This error message will be also displayed if you perform YPAO when the power amplifier is turned off.)

E-2: No Sur. SP

One of the surround speakers cannot be detected.

E-3: No F.PRNS SP

One of the front presence speakers cannot be detected.

E-4: SBR 

→

 SBL

A surround back speaker is connected to the R side only.

When using only one surround back speaker, you need to connect it to the SINGLE jack (L side). Follow the 
on-screen instructions to exit YPAO, turn off the unit and power amplifier, and then reconnect the speaker.

E-5: Noisy

The noise is too loud.

Keep the room quiet and follow the on-screen instructions to start the measurement again. If you select 
“PROCEED”, YPAO takes the measurement again and ignores any noise detected.

E-6: Check Sur.

Surround back speakers are connected, but no surround 
speakers are connected.

Surround speakers need to be connected in order to use surround back speakers. Follow the on-screen 
instructions to exit YPAO, turn off the unit and power amplifier, and then reconnect the speakers.

E-7: No MIC

The YPAO microphone has been removed.

Connect the YPAO microphone to the YPAO MIC jack firmly and follow the on-screen instructions to start the 
measurement again.

E-8: No Signal

The YPAO microphone cannot detect test tones.

Connect the YPAO microphone to the YPAO MIC jack firmly and follow the on-screen instructions to start the 
measurement again. If this error occurs repeatedly, contact the nearest authorized Yamaha dealer or service 
center.

E-9: User Cancel

The measurement has been canceled.

Follow the on-screen instructions to start the measurement again. To cancel the measurement, select “EXIT”.

E-10: Internal Error

An internal error has occurred.

Follow the on-screen instructions to exit YPAO, turn off and on the unit. If this error occurs repeatedly, contact 
the nearest authorized Yamaha dealer or service center.

E-11: No R.PRNS SP

One of the rear presence speakers cannot be detected.

Follow the on-screen instructions to exit YPAO, turn off the unit and power amplifier, and then check the 
power amplifier connections (to the unit or to the rear presence speakers).

1 2 3 4 5 6 7 8 9 10 11 12

Summary of Contents for CX-A5100




























































































































































































Reviews:

No comments

Related manuals for CX-A5100

B2 Audio Zero1 Owner'S Manual preview
Zero1
Brand: B2 Audio Pages: 10
Raymer Amplifier 800-40 Operating Instructions preview
Amplifier 800-40
Brand: Raymer Pages: 5
icon Audio HP 8 Instructions preview
HP 8
Brand: icon Audio Pages: 4
Akai AM-U310 Operator'S Manual preview
AM-U310
Brand: Akai Pages: 9
C-Data HF300-3815 Series User Manual preview
HF300-3815 Series
Brand: C-Data Pages: 7
Bose SoundTouch SA-5 Start Here Manual preview
SoundTouch SA-5
Brand: Bose Pages: 8
Randall SATAN Operation Manual preview
SATAN
Brand: Randall Pages: 6
Signal Vehicle Products SS741MG Installation And Operating Instructions Manual preview
SS741MG
Brand: Signal Vehicle Products Pages: 20
IC Audio AMP 480 User Manual preview
AMP 480
Brand: IC Audio Pages: 25
MC Crypt 30 39 70 User Manual preview
30 39 70
Brand: MC Crypt Pages: 2
MTI MPA82000 User Manual preview
MPA82000
Brand: MTI Pages: 12
Harman Kardon The Nocturne AX20 Instruction Manual preview
The Nocturne AX20
Brand: Harman Kardon Pages: 16
Myryad Z142 Owner'S Manual preview
Z142
Brand: Myryad Pages: 8
R.V.R. Elettronica HC2 LCD User Manual preview
HC2 LCD
Brand: R.V.R. Elettronica Pages: 34
Advantech ARMA-K100-CRM Installation And Operating Manual preview
ARMA-K100-CRM
Brand: Advantech Pages: 45
R.V.R. Electronica PJ700C-LCD User Manual preview
PJ700C-LCD
Brand: R.V.R. Electronica Pages: 36
Lab.gruppen LAB 1300C User Manual preview
LAB 1300C
Brand: Lab.gruppen Pages: 12
AR 10052412 Operating And Service Manual preview
10052412
Brand: AR Pages: 80

Brands by name

Popular brands

Load more brands