Yamaha CX-A5100 Owner'S Manual Download Page 28

Page: 28 / 187

■

Video/audio jacks

❑

HDMI jacks

Transmit digital video and digital sound through a single jack. Use an HDMI cable.

• Use a 19-pin HDMI cable with the HDMI logo. We recommend using a cable less than 5.0 m (16.4 ft) long

to prevent signal quality degradation.

• The unit’s HDMI jacks support the HDMI Control, Audio Return Channel (ARC), and 3D and Ultra HD (4K)

video transmission features.

• Use high speed HDMI cables to enjoy 3D or Ultra HD (4K) videos.

■

Video jacks

❑

COMPONENT VIDEO jacks

Transmit video signals separated into three components: luminance (Y), chrominance
blue (P

), and chrominance red (P

). Use a component video cable with three plugs.

❑

VIDEO jacks

Transmit analog video signals. Use a video pin cable.

Input/output jacks and cables

AV 1

HDMI cable

AV 1

Component video cable

AV 1

Video pin cable

Summary of Contents for CX-A5100




























































































































































































Search results

Summary of Contents for CX-A5100

Reviews:

Related manuals for CX-A5100

Brands by name

Popular brands

Yamaha CX-A5100, Owner'S Manual

Search results

Summary of Contents for CX-A5100

Reviews:

Related manuals for CX-A5100

Brands by name

Popular brands