manualshive.com logo in svg

Yamaha CX-A5100, Owner'S Manual

The Yamaha CX-A5100 is a cutting-edge AV preamplifier that delivers an unparalleled audio and video experience. To get the most out of this advanced device, make sure to download the comprehensive Owner's Manual for free from our website, manualshive.com. This manual provides detailed instructions on setup, features, and troubleshooting.

Share
Download
background image

En

165

Video

Problem

Cause

Remedy

No video.

Another input source is selected on the unit.

Select an appropriate input source with the input selection keys.

Another input source is selected on the TV.

Switch the TV input to display the video from the unit.

The video signal output from the unit is not supported by the TV.

Set “MONITOR CHECK” in the “ADVANCED SETUP” menu to “YES” (p.147).

The cable connecting the unit and TV (or playback device) is 
defective.

If there is no problem with the connection, replace with another cable.

No video from the playback device (connected to 
the unit with HDMI).

The input video signal (resolution) is not supported by the unit.

To check the information about the current video signal (resolution), use “Video 
Signal” in the “Information” menu (p.144). For information about video signals 
supported by the unit, see “HDMI signal compatibility” (p.179).

The TV does not support HDCP (High-bandwidth Digital Content 
Protection).

Refer to the instruction manuals for the TV and check the TV’s specifications.
If you want to play back contents that require HDCP 2.2-compatible devices, both 
the TV and playback device must support HDCP 2.2.

The playback device that supports HDCP 2.2 is connected to the 
VIDEO AUX (HDMI IN) jack.

To play back contents that require HDCP 2.2-compatible devices, connect the 
playback device to the HDMI (AV 1–7) jack (p.35).

The number of devices connected to the HDMI OUT jack is over 
the limit.

Disconnect some of the HDMI devices.

The menu of the unit is not displayed on the TV.

The TV is not connected to the unit via HDMI.

You can display the menu of the unit on the TV only when they are connected with 
an HDMI cable. If necessary, use an HDMI cable to connect them (p.33).

Another input source is selected on the TV.

Switch the TV input to display the video from the unit (HDMI OUT jack).

The video is interrupted.

(If you are using 2 TVs in the main zone)
Another TV is turned off when “HDMI OUT 1+2” is selected.

Select “HDMI OUT 1” or “HDMI OUT 2” to output the signals only to the TV you 
are using (p.66).

(If the HDMI OUT 2 jack is assigned to Zone2 or Zone4)
HDMI audio output may be interrupted during some zone 
operations due to internal circuitry switching.

For details, see “Connecting an HDMI-compatible device to play back 
videos/audio” (p.98). 

Summary of Contents for CX-A5100




























































































































































































Reviews:

No comments

Related manuals for CX-A5100

M2TECH CROSBY User Manual preview
CROSBY
Brand: M2TECH Pages: 17
Rane MA3 Operator'S Manual preview
MA3
Brand: Rane Pages: 6
M&S Systems MC2000 Owner'S Manual preview
MC2000
Brand: M&S Systems Pages: 44
Tabor Electronics 9260 User Manual preview
9260
Brand: Tabor Electronics Pages: 38
t.amp TSA 4-700 Owner'S Manual preview
TSA 4-700
Brand: t.amp Pages: 12
t.a.c. V-88 Instructions For Use Manual preview
V-88
Brand: t.a.c. Pages: 64
DAPAudio Vision 1600 Manual preview
Vision 1600
Brand: DAPAudio Pages: 18
icon Audio HP 8 Instructions preview
HP 8
Brand: icon Audio Pages: 4
zapco ZX-series Owner'S Manual preview
ZX-series
Brand: zapco Pages: 12
Majorcom: PM-839 User Manual preview
PM-839
Brand: Majorcom: Pages: 8
Soundavo M66-EXT Owner'S Manual preview
M66-EXT
Brand: Soundavo Pages: 12
JBL MS-A5001 User Manual preview
MS-A5001
Brand: JBL Pages: 14
Banner DF-G1-NS-2M Installation Manual preview
DF-G1-NS-2M
Brand: Banner Pages: 19
Sierra Video openGear UDA-8705A User Manual preview
openGear UDA-8705A
Brand: Sierra Video Pages: 35
VINTAGE SOUND AMPS V40mvp Manual preview
V40mvp
Brand: VINTAGE SOUND AMPS Pages: 9
icon Audio MB 845 Instruction Manual preview
MB 845
Brand: icon Audio Pages: 9
A SYSTEMS SR703 User Manual preview
SR703
Brand: A SYSTEMS Pages: 16
RVR Solar VJ1000 User Manual preview
VJ1000
Brand: RVR Solar Pages: 86

Brands by name

Popular brands

Load more brands