Yamaha CX-A5100 Owner'S Manual Download Page 133

Page: 133 / 187

133

HDMI

Configures the HDMI settings.

■

HDMI Control

Enables/disables HDMI Control (p.177).

Settings

• To use HDMI control, you need to perform the HDMI Control link setup (p.177) after connecting HDMI

Control-compatible devices.

Selects an audio input jack of the unit to be used for TV audio input when “HDMI
Control” is set to “On”. The unit’s input source automatically switches to TV audio
when the TV input is switched to its built-in tuner.

Settings

AUDIO 1–3

Default

AUDIO 1

• When using ARC to input TV audio to the unit, you cannot use the input jacks selected here for

connecting an external device because the input will be used for TV audio input.

Enables/disables ARC (p.178) when “HDMI Control” is set to “On”.

Settings

• You do not need to change this setting normally. In case noises are produced from the speakers

connected to the unit because TV audio signals input to the unit via ARC are not supported by the
unit, set “ARC” to “Off” and use the TV’s speakers.

Select whether to use HDMI control to link the standby behavior of the TV and the
unit when “HDMI Control” is set to “On”.

Settings

■

Audio Output

Selects a device to output audio.

• The “Amp” and “HDMI OUT1” settings are available only when “HDMI Control” is set to “Off”.

• The “HDMI OUT2” setting is available only when “HDMI OUT2 Assign” (p.139) is set to “Main”.

Enables/disables the audio output from the speakers and headphones connected
to the unit.

Settings

Off

Disables HDMI Control.

Enables HDMI Control.
Configure the settings in “TV Audio Input”, “ARC” and “Standby Sync”.

TV Audio Input

ARC

Off

Disables ARC.

Enables ARC.

Standby Sync

Off

Does not set the unit to standby mode when the TV is turned off.

Sets the unit to standby mode when the TV is turned off.

Auto

Sets the unit to standby mode when the TV is turned off only when the
unit is receiving TV audio or HDMI signals.

Amp

Off

Disables the audio output from the speakers and headphones.

Enables the audio output from the speakers and headphones.

Summary of Contents for CX-A5100




























































































































































































Search results

Summary of Contents for CX-A5100

Reviews:

Related manuals for CX-A5100

Brands by name

Popular brands

Yamaha CX-A5100, Owner'S Manual

Search results

Summary of Contents for CX-A5100

Reviews:

Related manuals for CX-A5100

Brands by name

Popular brands