Yamaha CX-A5100 Owner'S Manual Download Page 138

Page: 138 / 187

138

Use the cursor keys to select “OK” and press ENTER.

• To restore the default setting, select “RESET”.

To exit from the menu, press ON SCREEN.

■

Zone2 Set, Zone3 Set

Configures the Zone2 or Zone3 settings.

Enables/disables volume adjustments for Zone2 or Zone3 output.

If you have connected an external amplifier with volume control to the unit, disable
the volume adjustment for the corresponding zone.

Settings

Sets the Zone2 or Zone3 maximum volume to prevent excessive loudness.

Setting range

-30.0 dB to +15.0 dB (5.0 dB increments), +16.5 dB

• This setting is available only when “Volume” is set to “Variable”.

Sets the Zone2 or Zone3 initial volume for when the unit is turned on.

Settings

• This setting is available only when “Volume” is set to “Variable”.

Adjusts the audio output timing for Zone2 or Zone3 so that the audio is
synchronized with the video.

Setting range

0 ms to 100 ms (1 ms increments)

Switches between stereo and monaural for Zone2 or Zone3 output.

Settings

Changes the zone name (for Zone2 or Zone3) displayed on the front display or TV
screen.

You can change the zone name in the same manner as “Zone Rename” in “Main
Zone Set” (p.137).

Volume

Fixed

Disables volume adjustments for Zone2 or Zone3 output.

Variable

Enables volume adjustments for Zone2 or Zone3 output.

Max Volume

Initial Volume

Off

Sets the level at the volume level of the unit when it last entered standby
mode.

Sets at Mute or the specified volume level (-80.0 dB to +16.5 dB, 0.5 dB
increments).
(Specify a volume level which is lower than the “Max Volume” setting.)

Audio Delay

Mono

Off

Produces stereo sounds in Zone2 or Zone3.

Produces monaural sounds in Zone2 or Zone3.

Zone Rename

Summary of Contents for CX-A5100




























































































































































































Search results

Summary of Contents for CX-A5100

Reviews:

Related manuals for CX-A5100

Brands by name

Popular brands

Yamaha CX-A5100, Owner'S Manual

Search results

Summary of Contents for CX-A5100

Reviews:

Related manuals for CX-A5100

Brands by name

Popular brands