Yamaha CS1D, Operating Manual

Page: 5 / 630

4
Meter display in the IN HA/
INSERT function / OUT INSERT
function
In the IN HA/INSERT function and the OUT INSERT
function, meters are now displayed even for the effect
return, the graphic EQ output, and units to which the
talkback signal is assigned.
“Units to which an effect return is assigned”
“Units to which a graphic EQ output is assigned”
“Units to which the talkback signal is assigned”
Reference pages
•
Software section, pages 87 and 132
Additions and changes in the
INPUT UNIT screen
The following two additions/changes have been made in
the SYS/W.CLOCK function INPUT UNIT screen.
1 UNIT SELECT button
This button virtually connects a unit to the jack
selected by the IN 1–IN 10 buttons. This is the same
function as the UNIT SELECT button located in the
upper right of the screen in the previous version of
the software.
When you click this button, a popup window will
appear, allowing you to select a unit.
Hint
In V1.25, the above popup window lets you directly
select the model names (AI8-ML8, AI8-ML4AD4,
AI8-AD8) of currently-installed cards. If you select
one of these model names, it will not be necessary to
specify the installed card.
2 UNIT LIBRARY button
This button access the UNIT LIBRARY window,
where you can store/recall setting data for all units.
This button has the same function as the UNIT
LIBRARY button found in the ST IN INS/UNIT LIB
screen (IN HA/INSERT function).
Reference pages
•
Software section, pages 47–48
1 2