CONFIGURATIONS
➤
Configuring various functions (Setup menu)
En
126
• This setting is not available when “Surround” is set to “None”, or when “Layout (Surround)” is set to
“Front”.
Selects whether or not front presence speakers are connected and their size.
Settings
Selects whether or not rear presence speakers are connected and their size.
Settings
• This setting is not available when “Surround” or “Front Presence” is set to “None”.
Selects whether or not a subwoofer is connected to the SUBWOOFER 1 or
SUBWOOFER 2 jack and its phase.
Settings
• When the bass sound is lacking or unclear, switch the subwoofer phase.
Selects the layouts of the surround speakers, front/rear presence speakers and
subwoofers.
Surround
Selects a surround speaker layout when surround speakers are used.
Settings
• This setting is not available when “Configuration (Surround)” is set to “None”.
Small x1
Select this option when one small speaker is connected.
The subwoofer or front speakers will produce surround back channel
low-frequency components lower than the specified crossover
frequency (default: 80 Hz).
Small x2
Select this option when two small speakers are connected.
The subwoofer or front speakers will produce surround back channel
low-frequency components lower than the specified crossover
frequency (default: 80 Hz).
None
Select this option when no surround back speakers are connected.
The surround speakers will produce surround back channel audio.
Front Presence
Large
Select this option for large speakers.
Small
Select this option for small speakers.
None
Select this option when no front presence speakers are connected.
Rear Presence
Large
Select this option for large speakers.
Small
Select this option for small speakers.
None
Select this option when no rear presence speakers are connected.
Subwoofer 1, Subwoofer 2
Use
Normal
Select this option when a subwoofer is connected to the
SUBWOOFER 1 or SUBWOOFER 2 jack (phase not reversed). The
subwoofer will produce LFE (low-frequency effect) channel audio and
low-frequency components from other channels.
Reverse
Select this option when a subwoofer is connected to the
SUBWOOFER 1 or SUBWOOFER 2 jack (phase reversed). The
subwoofer will produce LFE (low-frequency effect) channel audio and
low-frequency components from other channels.
None
Select this option when no subwoofer is connected to the
SUBWOOFER 1 or SUBWOOFER 2 jack. The front speakers will
produce LFE (low-frequency effect) channel audio and low-frequency
components from other channels when both “Subwoofer 1” and
“Subwoofer 2” are set to “None”.
Layout
Rear
Select this option when surround speakers are placed on the rear side
of the room.
Front
Select this option when surround speakers are placed on the front
side of the room. Virtual CINEMA FRONT (p.73) works in this case.
