PLAYBACK
➤
Configuring playback settings for different playback sources (Option menu)
En
110
■
Video Processing (Video Process.)
Configures the video signal processing settings.
Enables/disables the video signal processing (resolution, aspect ratio and video
adjustments) settings configured in “Processing” (p.131) in the “Setup” menu.
Settings
Selects a video adjustment setting from presets you have configured in
“Adjustment” (p.131) in the “Setup” menu.
• This setting is applied separately to each input source.
Settings
1 to 6
■
Input Settings (Input Settings)
Configures the input settings.
• This setting is applied separately to each input source.
Corrects volume differences between input sources. If you are bothered by volume
differences when switching between input sources, use this function to correct it.
Setting range
-6.0 dB to 0.0 dB to +6.0 dB (0.5 dB increments)
Selects the audio input jack to use when more than one audio connection is made
for one input source.
Settings
Selects a video to be output with the audio input source.
Settings
Default
USB: V-AUX (V-AUX)
Others: Off (Off)
Video Mode (V.M)
Direct (Direct)
Disables the video signal processing.
Processing
(Processing)
Enables the video signal processing.
Video Adjustment (Video Adjust)
Input Trim (In.Trim)
Audio Select (A.Sel)
Auto (Auto)
Automatically selects the audio input jack in the following priority order.
1. HDMI input
2. Digital input (COAXIAL or OPTICAL)
3. Analog input (AUDIO)
HDMI (HDMI)
Always selects HDMI input. No sounds are produced when no signals
are input through the HDMI jack.
Coax/Opt
(Coax/Opt)
Always selects digital input (COAXIAL or OPTICAL). No sounds are
produced when no signals are input through the COAXIAL or
OPTICAL jack.
Analog (Analog)
Always selects analog input (AUDIO). No sounds are produced when
no signals are input through the AUDIO jacks.
Video Out (V.Out)
Off (Off)
Does not output video.
AV 1–7 (AV1–7),
V-AUX (V-AUX)
Outputs video input through the corresponding video input jacks.
