CONFIGURATIONS
➤
Configuring sound programs/surround decoders (Sound Program menu)
En
118
The following items are available when you select “2ch Stereo” or “9ch Stereo”.
• Available items in “9ch Stereo” vary depending on the speaker system being used.
Reverb Time
Adjust the decay time of the rear
reverberant sound.
1.0 s to 5.0 s
Higher to enrich the reverberant
sound and lower to have clear
sound.
Reverb Delay
Adjusts the delay between the
direct sound and reverberant
sound generation.
0 ms to 250 ms
Higher to enhance the delay
effect, and lower to reduce it.
Reverb Level
Adjusts the volume of the
reverberant sound.
0% to 100%
Higher to strengthen the
reverberant sound, and lower to
weaken it.
Item
Function
Settings
Sound program
Item
Function
Settings
2ch Stereo
Direct
Selects whether to
automatically bypass the
DSP circuit when an
analog audio source is
played back.
Auto, Off
9ch Stereo
Level
Adjusts the entire volume. -5 to 0 to +5
Front / Rear Balance
Adjusts the front and rear
volume balance.
-5 to 0 to +5
Higher to enhance the front
side, and lower to enhance
the rear side.
Left / Right Balance
Adjusts the left and right
volume balance.
-5 to 0 to +5
Higher to enhance the right
side, and lower to enhance
the left side.
Height Balance
Adjust the height volume
balance using the
presence speakers.
0 to 5 to 10
Higher to enhance the
upside, and lower to
enhance the downside. (The
presence speakers do not
produce sounds when
“Height Balance” is set to
“0”.)
Monaural Mix
Enables/disables
monaural sound output.
Off, On
