Yamaha Aventage RX-A2040 Owner'S Manual Download

Page: 156 / 182

APPENDIX

➤

Troubleshooting

156

No sound from the TV (when HDMI Control is
used).

The TV is set to output audio from the TV speakers.

Change the audio output setting on your TV so that the TV audio is output from the
speakers connected to the unit.

A TV that does not support ARC is connected to the unit only with
an HDMI cable.

Use a digital optical cable to make an audio connection (p.35).

(If the TV is connected to the unit with an audio cable)
The TV audio input setting does not match the actual connection.

Use “TV Audio Input” in the “Setup” menu to select the correct audio input jack
(p.132).

(If you are trying to use ARC)
ARC is disabled on the unit or TV.

Set “ARC” in the “Setup” menu to “On” (p.133). Also, enable ARC on the TV.

No sound from the Zone2 TV (connected to the
unit with HDMI).

The audio output from the HDMI OUT 2 (ZONE OUT) jack is
disabled.

Set “Audio Output” in the “Setup” menu to “On” (p.138).

Only the front speakers work on multichannel
audio.

The playback device is set to output 2-channel audio (such as
PCM) only.

To check it, use “Audio Signal” in the “Information” menu (p.143). If necessary,
change the digital audio output setting on the playback device.

Noise/hum is heard.

The unit is too close to another digital or radio frequency device.

Move the unit further away from the device.

The cable connecting the unit and playback device is defective.

If there is no problem with the connection, replace with another cable.

The sound is distorted.

The volume of the unit is too high.

Turn down the volume. If “ECO Mode” in the “Setup” menu is set to “On”, set it to
“Off” (p.141).

A device connected to the unit’s output jacks is not turned on.

Turn on all devices connected to the unit’s output jacks.

The sound is interrupted.

If the HDMI OUT 2 (ZONE OUT) jack is assigned to Zone2 or
Zone4, HDMI audio output may be interrupted during some zone
operations due to internal circuitry switching.

For details, see “Connecting an HDMI-compatible device to play back
videos/audio” (p.99).

Problem

Cause

Remedy

Summary of Contents for Aventage RX-A2040























































































































































































Search results

Summary of Contents for Aventage RX-A2040

Reviews:

Related manuals for Aventage RX-A2040

Brands by name

Popular brands

Yamaha Aventage RX-A2040, Owner'S Manual

Search results

Summary of Contents for Aventage RX-A2040

Reviews:

Related manuals for Aventage RX-A2040

Brands by name

Popular brands