LOWR
6-53
6S35H11
Lower unit
NOTE:
If the grooves in the propeller nut
6
do not
align with the cotter pin hole, tighten the nut
until they are aligned.
8.
Insert a gear oil tube or gear oil pump into
the drain hole and slowly fill the gear oil
until oil flows out of the check hole and no
air bubbles are visible.
9.
Install the new gasket, check screw
7
and quickly install the drain screw, then
tighten to specified torque.
69D10055
7
Recommended gear oil:
Hypoid gear oil
API: GL-4
SAE: 90
Gear oil quantity:
1,000 cm
3
(33.81 US oz, 35.27 Imp oz)
Propeller nut
6
:
54 N·m (5.4 kgf·m, 39.8 ft·lb)
Check screw
7
and drain screw:
9 N·m (0.9 kgf·m, 6.6 ft·lb)
6S35H11_061 05.9.5 14:15 Page 56
Summary of Contents for 250GETO
