POWR
5-39
6S35H11
Power unit
S60V5690
7.
Install the crankcase onto the cylinder
block, and then tighten the crankcase
bolts to the specified torques in two
stages and in the sequence shown.
NOTE:
•
Apply engine oil to the crankcase bolts
before installation.
•
Tighten crankcase bolts
z
—
,
to the spec-
ified torques in two stages first, and then
tighten crankcase bolts
.
—
¤2
to the spec-
ified torques in two stages.
8.
Tighten the oil seal housing bolts.
6S350080
E
E
z
—
,
: Crankcase bolt (M10):
1st: 20 N·m (2.0 kgf·m, 14.8 ft·lb)
2nd: 40 N·m (4.0 kgf·m, 29.5 ft·lb)
.
—
¤2
: Crankcase bolt (M6):
1st: 4 N·m (4.0 kgf·m, 3.0 ft·lb)
2nd: 8 N·m (8.0 kgf·m, 5.9 ft·lb)
4.
Install the oil seal housing onto the cylin-
der block.
NOTE:
Install the oil seal housing with the arrow
mark facing toward the crankcase.
5.
Install the oil pump driven gear onto the
crankcase.
6.
Apply sealant to the mating surface of the
crankcase.
NOTE:
Do not get any sealant on the journals.
S60V5B00
F
F
S60V5B20
6S350720
6S35H11_05 9/2/05 10:35 AM Page 42
Summary of Contents for 250GETO
