6S35H11
5-40
9
8
7
6
5
4
3
2
1
Crankcase
9.
Install the crankshaft balancer, and then
tighten the crankshaft balancer nut to the
specified torque.
c
C
Apply force to the direction of the arrows
shown, to prevent the flywheel holder
from slipping off easily
NOTE:
Apply engine oil to the crankshaft balancer
nut thread before installation.
10. Install the new gasket
7
and exhaust
cover
8
, and then tighten the exhaust
cover bolts to the specified torques in two
stages and in the sequence shown.
NOTE:
Apply LOCTITE 572 to the exhaust cover
bolts before installation.
11. Install the new gasket
9
thermostat base
0
,new gaskets
q
, thermostats
w
, and
thermostat cover
e
.
NOTE:
Apply LOCTITE 572 to the exhaust cover
bolts before installation.
6S350240
S60V5B50
Crankshaft balancer nut:
100 N·m (10 kgf·m, 73.8 ft·lb)
Flywheel holder: 90890-06522
7
8
6S350340
Exhaust cover bolt:
1st: 5 N·m (0.5 kgf·m, 3.7 ft·lb)
2nd: 10 N·m (1.0 kgf·m, 7.4 ft·lb)
Thermostat cover bolt:
10 N·m (1.0 kgf·m, 7.4 ft·lb)
9
0
q
q
w
w
e
e
6S350750
6S35H11_05 9/2/05 10:35 AM Page 43
Summary of Contents for 250GETO
