Yamaha 250GETO, Service Manual, Page: 233 / 293

6S35H11 7-30
9
8
7
6
5
4
3
2
1
PTT motor
6. Check the base. Replace if cracked or
damaged.
7. Check the bearing and oil seal. Replace
if damaged or worn.
Assembling the PTT motor
1. Install the new oil seal
1
and bearing
2
into the motor base
3
as shown.
2. Install the wave washer and bearing into
the frame.
3. Connect the PTT motor leads
4
to the
brush holder
5
, and then install the
brush holder
5
to the frame
6
.
4. Install the springs
7
and brushes
8
to
the brush holder.
5. Push the brushes
8
into the holders, and
then install the armature
9
.
6. Install a new O-ring, and align the line
with mating mark and then install the sta-
tor.
NOTE:
Align the line on the frame with the mating on
the flame.
7. Install the PTT motor base.
6S370160
2
3
1
6S370170
8
8
9
6S370180
6S370165
8
7
7
7
7
Lg
B
B
Sb
6
4
4
5
6S35H11_072 05.9.9 0:42 Page 31