background image

24

Chapter 2—Control Surface & Rear Panel

02R96 Version 2—Owner’s Manual

K

INPUT PATCH button

This button is used to select the following pages: Input Channel Patch, Input Channel Insert 
In Patch, Effect Input/Output Patch, Input Channel Name, and Input Patch Library. See 
“Input Patching” on page 66 for more information.

L

OUTPUT PATCH button

This button is used to select the following pages: Slot Output Patch, Omni Out Patch, Out-
put Insert In Patch, Input Channel Direct Out Destination, 2TR Out Digital Patch, Output 
Channel Name, and Output Patch Library. See “Output Patching” on page 68 for more 
information.

EFFECTS/PLUG-INS

A

EFFECTS/PLUG-INS DISPLAY button

This button is used to select the following pages: Effects Edit, Effects Library, Plug-In Setup, 
and Plug-In Edit. See “Internal Effects & Plug-Ins” on page 153 for more information.

B

INTERNAL EFFECTS button

This button is used to select the internal effects processors in conjunction with the 
EFFECTS/PLUG-INS [1–4] buttons. Its indicator lights up when it’s pressed. See “Editing 
Effects” on page 156 for more information.

C

PLUG-INS button

This button is used to select the Plug-Ins in conjunction with the EFFECTS/PLUG-INS 
[1–4] buttons. Its indicator lights up when it’s pressed. See “Editing Plug-Ins” on page 160 
for more information.

D

CHANNEL INSERTS button

If an internal effects processor or Y56K card effect is inserted in the currently selected chan-
nel, the relevant Effects Edit or Plug-In Edit page appears when this button is pressed, and 
its indicator lights up. In addition, the corresponding EFFECTS/PLUG-INS [1–4] button 
indicator flashes. If it’s a Y56K that is inserted, the [PLUG-INS] button indicator also 
flashes. If it’s an internal effects processor, the [INTERNAL EFFECTS] button indicator 
flashes. A warning message appears if there’s nothing inserted in the currently selected 
channel. See “Editing Effects” on page 156 and “Editing Plug-Ins” on page 160 for mor
information.

E

EFFECTS/PLUG-INS 1–4 buttons

These buttons are used to select the internal effects processors and Plug-Ins in conjunction 
with the EFFECTS/PLUG-INS [INTERNAL EFFECTS] and [PLUG-INS] buttons. The but-
ton indicator of the currently selected internal effects processor or Plug-In lights up. While 
the EFFECTS/PLUG-INS [CHANNEL INSERTS] button indicator is lit, all of these buttons 
are inactive.

F

Parameter Up/Down buttons

These buttons are used to select the rows of internal effects processor and Plug-In parame-
ters for editing with Parameter controls 1–4. The parameters in the currently selected row 
appear highlighted. Up to 16 parameters can be displayed at a time. If more are available, 
an up or down arrow is displayed. See “Editing Effects” on page 156 and “Editing Plug-Ins” 
on page 160 for mor
e information.

1

6

EFFECTS / PLUG  INS

INTERNAL

EFFECTS

CHANNEL

INSERTS

PLUG INS

1

2

3

4

DISPLAY

2 3 4

5

7

Summary of Contents for 02R96 Version 2






























































































































































































































































































































































Reviews: