Input Channel Mute Master
79
02R96 Version 2—Owner’s Manual
Input Channel Mute Master
The 02R96 features a Mute Master function that enables you to mute all channels in the
Mute group using the MASTER button, much like a Mute group on an analog mixing con-
sole. When the Mute Group Master function is enabled, the channel [ON] button status
does not link to the corresponding Mute group.
1
Follow Steps 1–4 as described in the “Grouping Input Channel Mutes
(ON/OFF)” section on the previous page, select the Input Mute Master check
box, then press the [ENTER] button to check or uncheck the Input Mute
Group Master check box.
2
When the Input Mute Master check box is checked, the MASTER MUTE but-
ton for each Mute group turns mute on or off for the channels in the corre-
sponding Mute group.
If the channels are muted by the Mute Master function, the corresponding channel [ON]
button indicators flash. You can assign the MASTER MUTE button function to one of the
USER DEFINED KEYS for convenient operation.
Setting Input Channel Levels
Input Channel levels can be set as follows.
1
Use the LAYER buttons to select the Layers.
2
Press the FADER MODE [FADER] button to select Fader mode.
3
Use the faders to set the Input Channel levels.
Refer to the legend on the left side of the faders when setting Input Channel levels.
Fader positions can be viewed on the Fader View pages. See “Viewing Channel
Fader Settings” on page 130 for more information.
Grouping Input Channel Faders
Input Channel faders can be grouped, allowing you to control the level of several Input
Channels simultaneously. There are eight Input Channel Fader groups: A, B, C, D, E, F, G,
and H.
1
Use the DISPLAY ACCESS [GROUP] button to locate the Input Channel Fader
Group pages.
The Fader Group parameters for the 56 Input Channels are divided between two pages. The
Input Channel 1–48 Fader Group page is shown below. The layout of the other page is the
same.
25
49
1
50
40
30
20
15
10
10
5
0
5
