background image

Operating Basics

43

02R96 Version 2—Owner’s Manual

3  Operating Basics

Connecting the Power Cord

Connect the socket-end of the supplied power cord to the AC IN 
on the rear panel of the 02R96. Connect the plug-end to a suitable 
AC wall outlet, one that conforms to the power supply require-
ments stated on the 02R96’s rear panel.

Turning On & Off the 02R96

To prevent loud clicks and thumps in your speakers, turn on your 
audio equipment in the following order (reverse this order when turn-
ing off)—sound sources, multitrack and master recorders, 02R96, 
monitoring power amplifiers.

1

To turn on the 02R96, press the [POWER] switch.

The startup page appears for a while, and then the last selected display page appears.

2

To turn off the 02R96, press the [POWER] switch again.

Warning: Turn off all equipment connected to the 02R96 before making any power connec-
tions.

Summary of Contents for 02R96 Version 2






























































































































































































































































































































































Reviews: